xx7xx
2004-03-22, 05:05 AM
http://www.planetsideimages.com/uploads/xx7xx%20MCG.jpg Ok, I've been at it again with my modeling. I actually have quite a few different models in the works- Gauss Rifle, Lasher, Pulsar, AMP, etc. etc. etc.
I'm also working on re-doing the vehicles as well. Anyway, here are some renders of my new MCG design. I know it is pretty radical at first, but take a look at it before you jump to conclusions and freak out :)
I tried to incorporate a large enough drum magazine to be able to realistically contain 1000 rounds of 10mm *caseless* ammunition. While 1000 rounds may seem like a huge amount, it really isn't when you look at the ammunition feed rates of modern miniguns.
Anyway, the MCG is supposed to be a support weapon, and not something to be used in close combat, able to be quickly pointed at short ranged fast moving targets. This design reflects this. Basically I wanted to come up with something that would be similar to a modern day SAW (M249), but still keep the design ideas of a Mini Chain Gun. Actually, there is no need to call it a "chain" gun, as it isn't chain driven. People tend to latch on to the word 'chain' and use it where it has absolutely no application (Devs for instance). Anyway, the design reflects a minigun built for use by a single person, and man portable, able to be fired from the shoulder so as to improve accuracy, while still able to be fired from the hip in a suppression role.
To reload it, the drum attaches at the front mounting point first, and then is pivoted into the reciever, where it locks in. Removal of the drum is just the opposite, hitting the magazine release, and then pivoting the drum away from the weapon.
Ammunition is either a hyper velocity (5000 fps) 10mm depleted uranium APDS (armor piercing discarding sabot) round, utilizing a 5mm penetrator, or a slightly lower velocity (3000 fps) HEI (high explosive incendiary) round.
The advantage of the HEI round is that it is more effective against softer targets, and has a small area of effect upon impact, while the HV-APDS round is better for heavier armored targets.
A note on the 'scope': a variable zoom electro-optical sight is standard on the minigun, even though it is a 'support' weapon.
Anway, here are the renders:
http://www.planetsideimages.com/uploads/xx7xx%20MCG%20side.jpg
http://www.planetsideimages.com/uploads/xx7xx%20MCG%20top%20angle.jpg
As usual, let me know what you think! (I'm sure you will)
I'm also working on re-doing the vehicles as well. Anyway, here are some renders of my new MCG design. I know it is pretty radical at first, but take a look at it before you jump to conclusions and freak out :)
I tried to incorporate a large enough drum magazine to be able to realistically contain 1000 rounds of 10mm *caseless* ammunition. While 1000 rounds may seem like a huge amount, it really isn't when you look at the ammunition feed rates of modern miniguns.
Anyway, the MCG is supposed to be a support weapon, and not something to be used in close combat, able to be quickly pointed at short ranged fast moving targets. This design reflects this. Basically I wanted to come up with something that would be similar to a modern day SAW (M249), but still keep the design ideas of a Mini Chain Gun. Actually, there is no need to call it a "chain" gun, as it isn't chain driven. People tend to latch on to the word 'chain' and use it where it has absolutely no application (Devs for instance). Anyway, the design reflects a minigun built for use by a single person, and man portable, able to be fired from the shoulder so as to improve accuracy, while still able to be fired from the hip in a suppression role.
To reload it, the drum attaches at the front mounting point first, and then is pivoted into the reciever, where it locks in. Removal of the drum is just the opposite, hitting the magazine release, and then pivoting the drum away from the weapon.
Ammunition is either a hyper velocity (5000 fps) 10mm depleted uranium APDS (armor piercing discarding sabot) round, utilizing a 5mm penetrator, or a slightly lower velocity (3000 fps) HEI (high explosive incendiary) round.
The advantage of the HEI round is that it is more effective against softer targets, and has a small area of effect upon impact, while the HV-APDS round is better for heavier armored targets.
A note on the 'scope': a variable zoom electro-optical sight is standard on the minigun, even though it is a 'support' weapon.
Anway, here are the renders:
http://www.planetsideimages.com/uploads/xx7xx%20MCG%20side.jpg
http://www.planetsideimages.com/uploads/xx7xx%20MCG%20top%20angle.jpg
As usual, let me know what you think! (I'm sure you will)