Ognose 4 Red on Error

[Corrosion]

K8N Neo
AMD Athlon 64 3200+
Kingston Value RAM 1024 MB PC 3200
Geforce Ti 4800 128 MB
Sony 8X DVD-RW
Seagate Barracuda 200 GB HD

Could the PSU be the problem?






I'm stuck at 4 red on error coding, which means:

System Power ON
-The D-LED will hang here if the processor is damaged or not installed properly




The OF said that the PSU is the problem, if the mobo or CPU is the problem, I have to waste 2 hours driving just to get a replacement. (bought most of the comp at a Comp Fair)

[Rbstr]

how many wats is it i can't ready it, if it says 250 as it appears to me you may want a new one as that probably is lower than waht you system needs.

My comp used to run an a raidmax, it ran fine, but i bought a 500w that was way cheap($50 incl. shipping)

If it says CUP damaged to not installed properly take a look and make sure no pins are bent or missing.

[Corrosion]

Originally Posted by Rbstr

how many wats is it i can't ready it, if it says 250 as it appears to me you may want a new one as that probably is lower than waht you system needs.

My comp used to run an a raidmax, it ran fine, but i bought a 500w that was way cheap($50 incl. shipping)

If it says CUP damaged to not installed properly take a look and make sure no pins are bent or missing.

It's a 350 W, the OF says that the problem is because it's [email protected] They say that it should be a minimum of 18A for AMD 64's.

[Rbstr]

that would be it then