need help building a gaming rig - Page 6

mockingjay · 2014-11-23, 07:25 AM

great thanks, is there anything cheaper that would do the job or is that as low as i can get it?

mockingjay · 2014-11-23, 07:31 AM

also what sort of setting would i be able to run it on and at roughly what fps?

Ghost Runner · 2014-11-26, 09:13 PM

Originally Posted by mockingjay

great thanks, is there anything cheaper that would do the job or is that as low as i can get it?

GTX 760 or 770 would work also but I think you have a really good deal on that 280X and it performs on par with the GTX 770\680 I suppose you could consider the R9 280 or the R9 285 But from what im told the 280X is a killer card and that price is pretty good.

Originally Posted by mockingjay

also what sort of setting would i be able to run it on and at roughly what fps?

This I have no hard data for but from what I can gather data on, it should run every thing on medium to high as long as you don't use AA as witcher 3 has not got propper support for it yet.

mockingjay · 2014-11-27, 06:48 AM

ok great, thanks for the help.

mockingjay · 2014-12-05, 09:22 AM

Are you sure this processor will work? it arrived today and i installed it but it wouldn't work, it it just a dud?

Ghost Runner · 2014-12-05, 07:47 PM

Its an 1155 Socket board with an 1155 socket Chip it should work,
what is happening blue screen? -may have to reinstall windows or find the driver causing the conflict in safe mode,

beeps? -RAM or proc may need to be reseated or proc is a dud but this is rare unless buying used,

or nothing at all? could be a connection knocked loose check power cords, case connectors, power supply.

Is the video card seated properly?

Is the CPU heatsync fan plugged in?

mockingjay · 2014-12-05, 08:45 PM

yeh i was wondering if the psu isnt strong enough or something. it will turn on, fans will spin for 10/15 secs then it stops, then it will keep doing that but the fans are only on for 1 or less secs. i dont have a system speaker so if there were beeps i wouldnt know. all the graphics cards/ ram should be fine as im using it now with my old cpu back in. i discharged my static before i touched anything so i dont think it is that.

Ghost Runner · 2014-12-05, 09:06 PM

Is your current chip overclocked? even if not try resetting the bios then install the new chip with just 1 stick of ram and see if that gets it going if it dose then shut it down, and add back the Ram to see if it will turn on still, if it dose then adjust the bios to the new chip. If not then start the RMA proccess.

Other thought see if the board needs a bios update to use the chip.

mockingjay · 2014-12-06, 07:30 AM

its not overclocked, unfortunately i cant get into the bios when using an hdmi cable for some reason and i dont have a vga cable one me atm. can any of these things be done without accessing it?

Ghost Runner · 2014-12-06, 07:41 AM

Well you can try the 1 stick of RAM but if the Bios is under voltaging aka not providing enough power to the chip it probably wont help can you reset the bios with a jumper on that board? Can also possibly reset the bios by pulling the Cmos battery and putting it back in of course.

mockingjay · 2014-12-06, 08:07 AM

ok i will give that a go in a bit, thanks.

mockingjay · 2014-12-08, 06:13 PM

I got it working, turns out i needed a bios update. now i just need to wait for the graphics card.

Goku · 2014-12-08, 08:59 PM

Originally Posted by Ghost Runner

Hi I havent seen Goku in awhile and I dont have the time to look through this thread to see what you have perhaps you can let me know what you are curently running and maybe I can point you in the right direction.

I lurk in about once a week, but I forget to scroll all the way down here often. Thanks for leading him in the right direction. The upgrades he got should make for a solid computer.

Ghost Runner · 2014-12-10, 08:21 PM

You are welcome glad to see you around still

teamxzz · 2016-08-24, 02:49 AM

I don't know the form factor of the case so you would have to start from there.