T-Ray Tweets New NC Asset (Wants our Feedback!) - Page 3

Mod · 2011-11-13, 11:39 AM

I would speculate that this was originally intended to be mounted, probably on battlement or some sizeable fixture (It looks quite heavy). Would really have to see it as an in-game asset to get a proper comparative size.

Definitely remove that "X" as has already been stated, seems out of place. Depending on what exactly it is going to be used for, could potentially have an outfit logo there if something is really required.

Maybe 5 barrels instead of 6?

And, not sure on the colour of that metal that is prominent across the top, bottom and side struts of the barrel.

Corax · 2011-11-13, 11:40 AM

At the bottom of the screenshot it has writing in green.

I think that it might be a clue as to what this weapon is/for.

It looks like it reads 312 Pan/Ze...n gear sp

Or like 213 Fan/Se...n 3 gear sp

can anyone else tell?

Heh and also check out the tabs at the bottom of the screen..... you can almost make out NC............

Corax · 2011-11-13, 11:46 AM

TRay ... Could you cut down on the thickness of the frame? More open air but still holding true to its current design. Ie: Keep the configuration you have now, but remove as much bulky metal as you can? I imagine it would be akin to just making the frame/housing less wide.

Basically go for the minimalist approach while maintaining current the current look and feel.

The NC have that scrapyard, miner mentality, so as long as it looks and feels sturdy, it'll get the job done. And it will stick to that spirit of re-purposing anything we can get our hands on

Mod · 2011-11-13, 11:47 AM

Also, if that really is a handle at the top, wouldn't that leave someones poor hand a little exposed compared with the triggered hand being covered by that plating?

TiberiusAudley · 2011-11-13, 11:48 AM

I feel compelled to photoshop the Me Gusta face onto an NC Soldier's body and post that in this thread.

I'm not a fan of the Smurfs, but...that thing looks like one hell of a mounted turret.

Corax · 2011-11-13, 11:52 AM

If this is meant to be hand held, and the hand shield were to stay.... It would need to be projected outwards and upwards. It would then be able to screen the forearm of the forwards hand up to the elbow as well as the abdomen of the shooter.

Senyu · 2011-11-13, 12:14 PM

Love the pic. Love even more that the development team actually comes and gets feedback from us. It's not even in beta!!! You guys are perfect for this game, so much love,detail, and determination to make this the best game possible.

Costemitcally for the screenshot, I suggest that after firing last shell or reloading there is a small section on near the end of the weapon but before the joystick and X blast shield, have a piston like thing expell the shell(s) or burst of air giving it a hydralic feel as it resets to fire. I'm sure it would be classic if after blowing your ammo you hear gears click and piston pops out releasing a *ssssssss* burst of air then locking back in place ready to fire again.

And for gameplay options this paticular screen shot have the varation of 6 barrels: more shots but weaker. 3 barrels: fewer shots but hits harder. Or the 6 is less acurate but is better at mowing down. And 3 is more accurate but you reload more often than 6.

On side note if its not already in the plans, someday allow small individual customization to weapons. Such as having the option (through unlocks or shop) of say for example having the X on the weapon blast shield bit like it is in original screenshot. Minor decals would be great for individuals to customize their equipment. Even having a variety of frames for the peices.

Corax · 2011-11-13, 12:21 PM

on side note.... it would be cool on that circular piece under the handguard that I am guessing is the motor, that if it spins in game, the players should be able to slap the NC logo or outfit logo or personal hearldry on there.... so it would be spinning in game..... might look cool

FIREk · 2011-11-13, 12:37 PM

Originally Posted by T-Ray

The frame holds the magnets in place. I guess I could find another way to mount them, thanks

Well, since only one barrel is firing at a time in a minigun, the magnets could be mounted on top of the barrels, thinner, mounted lengthwise and possibly shiny.

KCTitan · 2011-11-13, 01:05 PM

Originally Posted by T-Ray

The frame holds the magnets in place. I guess I could find another way to mount them, thanks

Nice hint.

Magnets make me think Gauss. Gauss with 6 barrels = Heavy Gauss Shotgun? Two fire modes. 3 barrel or full 6 barrel blast. Possibly even a single barrel fixed spread rapid fire cannon?

Trolltaxi · 2011-11-13, 01:14 PM

That must be something NC personel use to travel backwards at a high speed. They just shoot with it and whooom!!!, they are 10 meters behind....

I really do hope it is a mounted weapon, it simply looks way too heavy to wield, unless you are in a max. But as a mounted AV/AI turret weapon on a buggy or on the walls it feels ok.

Raymac · 2011-11-13, 01:14 PM

I like it. I think a more open air design might me cooler though. Maybe get rid of those light grey brackets to expose the barrels to make it look a little more like the Reaver gun. I wouldn't want to see any major changes to it because it looks mean.

On a side note: People, look at how this gun is held with the handles, and then the multiple barrels. This IS a Mini Chain Gun, or MCG. Don't let the NC colors fool you.

**T-Ray** · 2011-11-13, 01:16 PM

Originally Posted by Corax

TRay ... Could you cut down on the thickness of the frame? More open air but still holding true to its current design. Ie: Keep the configuration you have now, but remove as much bulky metal as you can? I imagine it would be akin to just making the frame/housing less wide.

Basically go for the minimalist approach while maintaining current the current look and feel.

The NC have that scrapyard, miner mentality, so as long as it looks and feels sturdy, it'll get the job done. And it will stick to that spirit of re-purposing anything we can get our hands on

will do

FastAndFree · 2011-11-13, 01:22 PM

Take note, NC, this is what happens when you put a mining foreman in charge of weapons development.

-Put a guard plate there to protect the operator from shattering rock fragments.
-But this isn't a drill, this is a chaingun...
-WHO IS IN CHARGE HERE?!

Mastachief · 2011-11-13, 01:34 PM

Originally Posted by T-Ray

The frame holds the magnets in place. I guess I could find another way to mount them, thanks

I get ya, what i mean is to shorten the top rail to the furthest magnet along and perhaps having a metal plate there to fix top to bottom rails leaving the barrels exposed up the front with that huge lump of metal gone then the gun would be better weighted. The shape as a whole leads me to remember the arm on the NC max units in planetside1.